thermographic

网络  热图

医学

COCA.46765



双语例句

  1. Thermographic Identification Algorithm of Two-dimensional Irregular-shaped Self-heating Subsurface Defects
    另外两个变化不规则的形容词是many,m-a-n-y,many二维不规则形状发热型缺陷的红外识别算法
  2. Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steels Under High Frequency Loading
    高频载荷下高强钢的超高周疲劳及热耗散研究
  3. This paper, based on fatigue energy theory, discusses the principle that materials'fatigue limit can be determined by thermographic method.
    针对传统挡土墙土压力计算理论的局限性,运用极限理论分析荷载,用能量理论计算挡土墙的土压力。
  4. The result of thermographic curves shows that the copolymer is resistant to high temperature of200 ℃.
    结果表明,共聚物的抗温能力可达到200℃以上。
  5. This thesis researches into the theory of applying the infrared thermographic inspection technology to detecting faults in concrete.
    故在土木工程领域,红外热像检测技术的应用不像在其它产业部分那样普遍。
  6. Microcapsule's Phase Change Materials in Ir Thermographic Decoy; Special PLL used in target RF simulation of the radio detonator
    红外热成像仿真假目标技术用微胶囊相变材料的研制引信目标射频仿真中的特殊锁相环路
  7. Infrared Thermographic Image-Guided Technique for Cryosurgery and Tumor Hyperthermia
    肿瘤冷冻治疗与高温热疗中的红外热图引导技术
  8. The principle and the main instrument of the thermographic slag detection system ( TSD) based on IR technology are introduced.
    本文介绍了使用红外成像技术的热图像炉渣检测仪工作的基本原理及系统构成。
  9. The basic theory of infrared thermographic testing was introduced.
    介绍红外层析检测的基本原理。
  10. The character research of aerodynamic heating on lifting body model using infrared thermographic technique Simulation and Test of Aeroheating and Thermal Response of TPS for Hypersonic Vehicle
    用红外热图技术进行升力体模型气动热特性试验研究
  11. Application of Infrared Thermographic Technique in Detecting the Thermal Loss of Petrochemical Thermal Equipment
    红外热像技术在石化热设备热损检测上的应用
  12. Principal component analysis used in pulsed thermographic NDT of aluminum specimens
    铝试件脉冲红外热无损检测的主分量分析
  13. The Properties of Thermographic Phosphor and Its Application in Thermal Mapping Technique
    温度敏感荧光粉的性质及其在热图谱技术中的应用
  14. Infrared Thermographic Inspection for the Crack in Carbon Fiber Reinforced Concrete
    碳纤维增强混凝土中裂纹的红外热像检测方法与机理研究
  15. Thermographic analysis on distribution of hand skin temperature among workers exposed to vibration and the effect of cold water test
    手传振动作业工人手部温度分布的红外图像分析及其冷水负荷试验的影响
  16. Study on numerical method determining size and position of subsurface defect based on thermographic temperature measurement
    基于红外测温的内部缺陷尺寸、方位的计算方法研究
  17. The main characteristics of IR thermography on temperature measurement and the development of infrared thermographic equipments are discussed.
    论述了红外热像技术及其在温度(场)测试方面的特点,红外热像设备的研究发展历程及国内外的最新进展。
  18. Pulse thermographic method for measuring defect depth
    缺陷深度脉冲热像检测新方法
  19. In infrared thermographic non-destructive testing, to reduce the effects of non-uniform heating and increase defect contrast and inspection depths, the thermal image sequence processing algorithms were studied based on the pulsed thermography of carbon fibre reinforced plastic samples.
    在红外热像无损检测中,为了减小加热不均的不良影响,提高缺陷对比度和检测深度,以碳纤维增强塑料试件的脉冲热像检测为例,研究了加热不均时的热像序列处理方法。
  20. An algorithm study on identification of subsurface defect based on thermographic temperature measurement
    基于红外测温的试件内部缺陷的识别算法研究
  21. Pulse thermographic method for determining defect depth through peak time was introduced. It was difficult to catch the peak time of the materials with good heat conduction.
    介绍脉冲热像检测中由峰值时间求缺陷深度的方法,对热传导性能好的材料,从红外热像时间序列难以捕捉到峰值时间。
  22. So a new parameter was put forward for determining defect depth which could avoid peak time and be recorded by thermographic instrument.
    为此提出了一个既能避开峰值时间又能被红外热像仪探测和记录的新参数,从而达到测量缺陷深度的目的。
  23. Temperature Distribution of Defect Surface and Effect of Natural Convection on Thermographic Inspection
    缺陷表面温度分布及空腔自然对流对红外检测的影响
  24. A large testing installation was constructed and infrared thermographic testing experiments were performed for four kinds of stainless steel and carbon steel pipes with the inner surface holes of different sizes.
    建立了大型管道试验装置,并对带有不同几何尺寸内部开孔缺陷的四种不锈钢和20钢管进行了红外热成像检测试验。
  25. A continuous grey tone thermographic picture has been encoded into a pseudo-color image by means of the technique of half-tone screens preprocessing and spatial filtering.
    借助于半色调屏预处理与空间滤波技术,把一张连续色调的热红外图象编码成假彩色图象。
  26. This paper summarized the development status of ultrasonic testing which is a traditional concrete flaw detecting technology. By the way, some newly arisen technologies such as impact-echo, radar detecting, infrared thermographic testing and acoustic emission are also introduced.
    总结了混凝土缺陷无损检测传统技术超声法的发展现状,并介绍了一些新兴的无损检测技术:冲击回波法、雷达法、红外热像法以及声发射法等。
  27. The mechanism study of local thermographic hyperthermia on the experimental tumor in mice
    小鼠实验性肿瘤局部热图高温机制研究
  28. Analysis on Affecting Factors of Thermographic Inspection of Electric Apparatus
    电气设备红外故障诊断中的影响因素分析
  29. Preliminary research of infrared thermographic technique in hypersonic low density wind tunnel
    高超声速低密度风洞红外热图技术初步研究
  30. The fracture process is modeled by performing finite element analysis using ANSYS software, and the propagation path of compound crack as well as the crack tip temperature field is simulated. Furthermore, the fatigue tests of high strength steel specimens are carried out under IR thermographic detection.
    进一步采用有限元软件ANSYS模拟拉伸试验过程,获得复合型裂纹的扩展路径以及扩展过程中的裂尖温度场变化。同时,进行高强度钢试件的疲劳试验,并采用热像仪进行监测。